TM 9-2330-238-14
5-15. LANDING GEAR RATCHET MAINTENANCE
(EARLY MODEL)
(Con’t).
1.
If handle (5) was removed,
install new rivet (6) through handle and ratchet handcrank
(4). Peen rivet end over
handcrank,
ensuring
a minimum Me in. (6.25 mm) end play is allowed
between
rivet head and handle.
2.
Install ratchet wheel (11), gear end first, in handcrank
(4).
3.
Install plate and lever assembly
(12) over ratchet wheel (11) and on handcrank
(4),
4.
Install three capscrews
(14), new Iockwashers
(1), and nuts (2) in plate and lever assembly
(12) and handcrank
(4). If removed,
install lubrication
fitting (3) in handcrank.
5.
Install bearing ball (9), spring (8), and expansion
plug (7), if removed,
in handcrank
(4).
6.
Lubricate
in accordance
with Lubrication
Instructions
(Chapter 3, Section l).
Install handcrank
(4) on crankshaft (13)
with capscrew (15)
and new self-locking
nut (10).
5-45
