TM 9-2330-238-14
5-14. LANDING
GEAR ACTUATING
LEG ASSEMBLY
REPAIR (EARLY MODEL) (Con’t).
6.
Hold bevel gear (9) and remove self-locking
nut (11) from actuator screw (22).
7.
Remove bevel gear (9) and machine
key (16) from actuator
screw (22).
8.
Using soft-faced
hammer, drive actuator
screw (22) and inner leg (31) as a unit from outer leg assembly
(3).
9.
Remove tapered
cone and rollers (8) and tapered
roller cup (7) from outer leg assembly
(3).
10.
Remove thrust roller bearing
(21) and actuator screw (22) from inner leg (31).
11.
12.
13.
14.
15.
Remove headless
grooved
pin (23) from actuator screw (22).
Drive two shoulder pins (20) inward from inner leg (31) and elevating nut (19). Remove elevating
nut from inner
leg.
Remove two sleeve bearings
(4), capscrew
(1), and two lubrication
fittings
(32) from outer leg assembly
(3).
Discard
lubrication
fittings.
Remove nut (24), internally relieved bolt (27), spring (26), and latch (25) from inner leg (31). Remove spring pin
(29) and lubrication
fitting (28). Discard
spring pin and lubrication
fitting.
Remove spring pin (30) from inner leg (31). Discard spring pin.
TA702084
5-40
