TM 9-2330-238-14
5-14. LANDING GEAR ACTUATING
LEG ASSEMBLY REPAIR (EARLY MODEL).
This Task Covers:
Disassembly
c.
Assembly
Cleaning
and Inspection
Equipment
Conditions:
Materials/Parts:
l Landing gear removed
(para 5-11).
l Dry cleaning
solvent (Item 14, Appendix
E)
Tools/Test Equipment:
l One gasket
l General mechanic’s
tool kit
l One self-locking
nut
References:
l Three lubrication
fittings
l TM 9-214
l Four spring pins
1.
Remove two screws
(14), two screws (15), access
cover (13), and gasket (12) from outer leg assembly
(3).
Discard gasket.
2.
Remove two spring pins (6) from drive shaft (5). Discard spring pins.
3.
Hold bevel gear (18) and drive drive shaft (5) out until woodruff
key (17) can be removed.
4.
Drive drive shaft (5) from outer leg assembly
(3) and remove washer (10) and bevel gear (18).
5.
Remove two plugs (2) from outer leg assembly
(3).
TA702083
5-39
