TM 5-4930-244-14
(15)
Install air pressure gauge (8) into control panel (2) with three screws (47). Secure with three locknuts (48).
(16)
Install panel lights (36) to front and side of control panel (2) using two screws (45) and two locknuts (44) on each
panel light. Be sure to connect ground wires #6 and #7 (19) beneath their respective nuts.
(17)
Connect wires #14 and #15 (39) to the ammeter (40) and the shunt (35).
(18)
Attach wire #18 (41), connecting oil pressure gauge (31) and run/stop switch (27). Attach wire #19 (42),
connecting fuel gauge (33) and run/stop switch (27). Attach wire #22 (43), connecting crank (29) and run/stop
switch (27).
4-74
