TM 5-3895-376-14&P
e
Place throttle control to full speed position
4-45. SHIPMENT
a
Close air intake and exhaust openings with mois-
f.
Turn decompression knob to neutral position.
ture proof tape.
g,
Crank the engine approximately 20 times
b.
Tape the engine crank handle in place on the
h.
guide bar.
Place throttle control to the stop position.
c.
Attach to the compactor all forms, tags, and re-
Close air intake and exhaust openings with mois-
i.
cords applicable to the unit.
ture proof tape.
Stow the compactor in an area protected from
j.
WARNING
the elements.
Do not allow personnel to stand under
NOTE
a hoisted compactor. Injury or death
If compactor is to be in storage for periods
may occur should hoist or lifting sling
longer than 3 months, repeat steps e.
fail and the compactor falls.
through j. every 3 months.
d.
A lifting point is provided at the top of the protec-
k.
Before returning compactor to service, drain the
tion frame for the purpose of attaching a lifting de-
vice capable of lifting 400 pounds.
e.
Load compactor on carrier and attach shipping
tiedowns.
4-75/(4-76 Blank)