TM 5-3895-376-14&P
4-30. FUEL TANK MAINTENANCE INSTRUCTIONS Continued
in recesses molded in fuel tank and fit around the
4.
Remove fuel tank cap (1).
brackets (7 and 8). Secure clamps with cap-
screws (5), tightening capscrews firmly without
5.
Remove gasket (2) from cap (1).
deforming the fuel tank (3).
6.
Remove two capscrews (5) and tank clamps (4).
11. Fit gasket (2) into the fuel tank cap (1), and install
the cap on the fuel tank (3).
7.
Remove fuel tank (3) and felt strips (6).
12. Reconnect the fuel lines disconnected in steps 1,
8.
If brackets (7 or 8) require replacement, remove
2 and 3 (Para. 4-29).
hex nuts (9), flat washers (10), and brackets (7
and 8). Install replacement brackets (7 and 8)
NOTE
and secure with flat washers (10) and hex
nuts (9)
Follow-on tasks include: Service the fuel
tank (Para. 3-7), return compactor to ser-
9.
Fit new felt strips (6) onto brackets (7 and 8).
vice.
10. Support fuel tank (3) on felt strips and secure
with tank clamps (4) Ensure that clamps (4) seat
4-58
