TM 5-3825-230-14&P
WARNING
Adhesives, solvents and sealing compounds can burn easily, can give off harmful vapors and are
harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in well-
ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash
immediately with soap and water.
NOTE
Thread locking compound must be
applied
to
all
screws
during
installation procedures.
(2)
Apply thread locking compound to threads
of screws (14, 12, and 6).
(3)
Install four screws (14) and endcap (15)
using a 3/16 in. hex head wrench.
(4)
Install four screws (12) and endcap (13)
using a 3/16 in. hex head wrench.
(5)
Install O-ring (11) and plug (12) in valve
body using a 1-1/4 in. open end wrench.
(6)
Install two O-rings (9) and two port plugs
(8) using a 1-1/4 in. open end wrench.
5-109
