TM 5-3825-230-14&P
4-66. JUNCTION BOX REPLACEMENT/REPAIR (CONT).
d. Installation.
(1)
Install junction box (8), four screws (9), eight
washers (11) and four nuts (10) using 7/16 in.
open end wrench, ratchet and 7/16 in. socket.
(2)
Install four cables (7), four locking rings (5) and
tighten four knurled knobs (6) using pliers.
(3)
Install wires (3) and three resistors (4) using 3/8
in. socket and drive.
(4)
Install cover (2) and four screws (1) using flat tip
screwdriver.
END OF TASK
4-100
