TM 5-3825-230-14&P
4-65. FUSE AND HOLDER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cables
Materials/Parts
disconnected.
Lockwasher
Fuse
Fuse holder
Tags, identification, item 35 Appendix E
a. Removal.
(1)
Remove screw (1), lockwasher (2), and washer
(3) using a 7/16 in. open end wrench. Lower
panel (4).
NOTE
Tag all wires before removal to aid in
installation.
(2)
Tag wire (5) and unplug connector (6) from back
of ignition switch (7).
(3)
Tag wire (8) and remove screw (9) from back of
spray pump toggle switch (10) using a flat tip
screwdriver. Remove wires (5 and 8).
(4)
Remove fuse holder (11), and fuse (12).
b. Installation.
(1)
Install fuse (12) in holder (11).
(2)
Install wire (8) and screw (9) on back of spray
pump toggle switch (10) using a flat tip
screwdriver.
(3)
Connect wire (5) on back of ignition switch (7).
(4)
Raise panel (4) and install washer (3), lockwasher (2), and screw (1) using a 7/16 in. open end wrench.
NOTE
Follow-on maintenance: Connect battery cables (para 4-73)
END OF TASK
4-97
