TM 5-3825-230-14&P
4-64.
SPRAY PUMP TOGGLE SWITCH REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 4-73
Battery cables
Materials/Parts
disconnected.
Lockwasher
Tags, identification, item 35 Appendix E
a.
Removal.
(1)
Remove screw (1), lockwasher (2), and washer
(3) using a 7/16 in. open end wrench. Lower
panel (4).
NOTE
Tag all wires before removal to aid in
installation.
(2)
Tag and disconnect two wires (5) using a flat tip
screwdriver.
NOTE
Nut and plastic cover are one piece
that can be pulled off the switch.
(3)
Remove nut (6) using a 5/8 in. open end
wrench.
(4)
Remove switch (7) from rear of panel (4).
b.
Installation.
(1)
Install switch (7).
(2)
Install nut (6) using a 5/8 in. open end wrench.
(3)
Install two wires (5) using a flat tip screwdriver.
(4)
Raise panel (4) and install washer (3), lockwasher (z), and screw (1) using a 7l/b in. open end wrench.
NOTE
Follow-on maintenance: Connect battery cables (para 4-73)
END OF TASK
4-96