TM 5-3825-230-14&P
(3)
Remove nut (4), screw (5), and throttle cable (1) from throttle assembly (6) using a 12 mm and 13 mm
open end wrenches.
(4)
Remove screw (7), handle (8), two nuts (9), and washer (10) using a cross tip screwdriver and 7/8 in. open
end wrench.
(5)
Pull throttle cable (1) out of engine cowling (11) (to inside).
(6)
Tag engine cut-off cable (12).
(7)
Remove handle (13) and nut (14) using a 3/8 in. open end wrench.
(8)
Remove two nuts (15) using a 1/2 in. open end wrench.
(9)
Loosen screw (16) using a flat tip screwdriver and remove cable lock (17).
(10)
Remove nut (18), screw (19), and engine cut-off cable (12) from throttle assembly (6) using a 12 mm and
13 mm open end wrenches.
(11)
Pull engine cut-off cable (12) out of engine cowling (11).
b.
Installation.
(1)
Install engine cut-off cable (12), screw (19), and nut (18) on throttle assembly (6) using a 12 mm and 13
mm open end wrenches.
(2)
Install cable lock (17) on engine cut-off cable (12) and tighten screw (16) using a flat tip screwdriver.
(3)
Install engine cut-off cable (12) and two nuts (15) in engine cowling (11). Tighten nuts using a 1/2 in. open
end wrench.
(4)
Install handle (13) and nut (14). Tighten nut using a 3/8 in. open end wrench.
(5)
Install throttle cable (1), screw (5), and nut (4) on throttle assembly (6) using a 12 mm and 13 mm open
end wrenches.
(6)
Install cable lock (3) on throttle cable (1) and tighten screw (2) using a flat tip screwdriver.
(7)
Install throttle cable (1), washer (10), two nuts (9), handle (8), and screw (7). Tighten using a 7/8 in. open
end wrench.
NOTE
Follow-on maintenance:
Adjust engine speed (para 4-23)
Install top access panel (para 4-98)
Install left and right access covers (para 3-5)
END OF TASK
4-67
