TM 5-3825-230-14&P
4-46. FUEL LINE REPLACEMENT (BLEED LINES).
This task covers:
a. Removal
b. Installation
INITIAL SETUP:
Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
TM or Para
Condition Description
Para 3-15
Fuel valve shut off.
Materials/Parts
Para 3-5
Left and right side access
Copper washers
covers opened.
Washer Para 4-98
Top access panel
Loop clamp
removed.
Fuel hose (See Appendix G for fabrication)
WARNING
Fuel is very flammable and can explode easily. To avoid serious injury or death, keep fuel away
from open fire and keep fire extinguisher within easy reach when working with fuel. Do not work
on fuel system when engine is hot. Fuel can be ignited by hot engine. When working with fuel,
post signs that read NO SMOKING WITHIN 50 FEET (15.24 m) of vehicle.
(1)
Remove connecting bolt (1), copper washer (2), deaeration valve (3), washer (4), copper washer (5),
barbed fitting (6), bleed line (7), and clamp (8) using a 17 mm open end wrench and flat tip screwdriver.
4-64
