TM 5-3805-296-23-6
0430
REMOVAL CONTINUED
4. Remove four bolts (Figure 13, Item 4), washers (Figure 13, Item 3), two flange halves (Figure 13, Item 2) and
hydraulic line (Figure 13, Item 6) from hydraulic line (Figure 13, Item 1).
5. Remove O-ring (Figure 13, Item 5) from hydraulic line (Figure 13, Item 6). Discard O-ring.
6. Remove four bolts (Figure 13, Item 11), washers (Figure 13, Item 10), two flange halves (Figure 13, Item 9)
and hydraulic hose (Figure 13, Item 12) from hydraulic line (Figure 13, Item 1).
7. Remove O-ring (Figure 13, Item 13) from hydraulic hose (Figure 13, Item 12). Discard O-ring.
8. Remove two bolts (Figure 13, Item 14), washers (Figure 13, Item 7) and hydraulic line (Figure 13, Item 1) from
bracket (Figure 13, Item 8).
9. Remove hydraulic line (Figure 13, Item 1) from machine.
Figure 13. Crossover Line, Right.
0430
END OF TASK
CLEANING AND INSPECTION
000430
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK