TM 5-3805-296-23-6
0373
REMOVAL CONTINUED
12. Assemble hydraulic pump (Figure 4, Item 6) (WP 0541).
13. Replace bead breaker clamping set screw (WP 0541).
14. Connect hydraulic pump hose (Figure 4, Item 7) to bead breaker (Figure 4, Item 1).
15. Connect air hose from remote air compressor to quick-disconnect fitting (Figure 4, Item 5).
16. Position adapter block (Figure 4, Item 4) and bead breaker (Figure 4, Item 1) on tire rim (Figure 4, Item 8) with
hook (Figure 4, Item 3) in notch (Figure 4, Item 2) on tire rim.
17. Hand-tighten clamping set screw (Figure 4, Item 9) until bead breaker (Figure 4, Item 1) is perpendicular to tire
rim (Figure 4, Item 8).
Figure 4. Front Outer Bead.
0373
