TM 5-3805-296-23-5
0356
ASSEMBLY CONTINUED
CAUTION
Do not disconnect jumper harness from air pressure sensor. Air pressure sensor damage
will occur.
NOTE
Install tiedown straps as noted during removal.
11. Do not disconnect connector (Figure 14, Item 1) from air pressure sensor (Figure 14, Item 2).
12. Install new O-ring (Figure 14, Item 5) and air pressure sensor (Figure 14, Item 2) on fitting (Figure 14, Item 6).
13. Install new tiedown straps (Figure 14, Item 7) on wiring harness (Figure 14, Item 8) and air pressure sensor
(Figure 14, Item 2).
14. Install P-clamp (Figure 14, Item 3) on relay (Figure 14, Item 4).
Figure 14. Air Pressure Sensor Relay and Sensor.
0356
END OF TASK
