TM 5-3805-296-23-5
0356
ASSEMBLY
000356
NOTE
Air lines must be connected to original ports on brake air supply solenoid.
1. If installing new brake air supply solenoid, go to step 2. Otherwise, go to step 4.
2. Verify port 1 (Figure 12, Item 3) and port 2 (Figure 12, Item 1) on new brake air supply solenoid
(Figure 12, Item 4) are in same position as ports 1 and 2 on original brake air supply solenoid.
3. If port 1 (Figure 12, Item 3) and port 2 (Figure 12, Item 1) are not correctly aligned on new brake air supply
solenoid (Figure 12, Item 4), loosen nut (Figure 12, Item 5), and rotate valve (Figure 12, Item 2) until port 1 and
port 2 are in correct position, then tighten nut.
Figure 12. Air Port Position.
0356