TM 5-3805-296-23-5
0333
INSTALLATION
000333
WARNING
Wheels must remain chocked during entire procedure. Failure to follow this warning may
result in injury or death to personnel.
NOTE
Install P-clamp as noted during removal.
1. Install two clips (Figure 10, Item 7), one spacer (Figure 10, Item 8), P-clamp (Figure 10, Item 3), two
washers (Figure 10, Item 6), and nuts (Figure 10, Item 5) on bolts (Figure 10, Item 4).
2. Using assistance, install washer (Figure 10, Item 4), bolt (Figure 10, Item 3), air tanks (Figure 10, Item 14),
clamp (Figure 10, Item 13), washer (Figure 10, Item 11), and nut (Figure 10, Item 12) on air tank access plate
(Figure 10, Item 7).
3. Using assistance, install washer (Figure 10, Item 6), bolt (Figure 10, Item 5), clamp (Figure 10, Item 13),
spacer (Figure 10, Item 8), P-clamp (Figure 10, Item 2), washer (Figure 10, Item 9), and nut (Figure 10, Item
10) on air tank access plate (Figure 10, Item 7).
Figure 10. Air Tanks and Mounting Bolts.
0333
