TM 5-3805-296-23-5
0325
DRAINING CONTINUED
2. Position drain pan underneath hydraulic oil tank, and remove plug (Figure 2, Item 2) from drain (Figure 2,
Item 1).
3. Open drain valve (Figure 2, Item 3), and allow hydraulic fluid to drain from hydraulic oil tank.
Figure 2. Plug.
0325
END OF TASK
CLEANING AND INSPECTION
000325
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
FILLING
000325
1. Close drain valve (Figure 2, Item 3), and install plug (Figure 2, Item 2) on drain (Figure 2, Item 1).
2. Remove drain pan.