TM 5-3805-296-23-5
0298
REMOVAL CONTINUED
2. Disconnect quick-disconnect fitting (Figure 2, Item 3) from steering metering pump fitting (Figure 2, Item 4).
3. Loosen tube nut (Figure 2, Item 1) and remove quick-disconnect fitting (Figure 2, Item 3) from hydraulic hose
(Figure 2, Item 8).
4. Remove O-ring (Figure 2, Item 2) from quick-disconnect fitting (Figure 2, Item 3). Discard O-ring.
5. Loosen tube nut (Figure 2, Item 7) and remove hydraulic hose (Figure 2, Item 8) from steering control valve
fitting (Figure 2, Item 5).
6. Remove hydraulic hose (Figure 2, Item 8) from machine.
7. Remove O-ring (Figure 2, Item 6) from fitting (Figure 2, Item 5). Discard O-ring.
Figure 2. Check and Relief Valve Hose.
0298
END OF TASK
CLEANING AND INSPECTION
000298
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
