TM 5-3805-296-23-4
0276
INSTALLATION CONTINUED
NOTE
Remove plugs and caps from hydraulic hoses and fittings.
Install hydraulic hoses as tagged and marked during removal.
83. Install pressure-reducing valve and plate assembly (Figure 52, Item 7) on machine.
84. Connect wiring harness connector (Figure 52, Item 12) to pressure-reducing valve (Figure 52, Item 13), and
install new tiedown strap (Figure 52, Item 10) on wiring harness (Figure 52, Item 11).
85. Install three washers (Figure 52, Item 2) and nuts (Figure 52, Item 3) on pressure-reducing valve and plate
assembly (Figure 52, Item 7).
86. Install two washers (Figure 52, Item 6) and bolts (Figure 52, Item 5) on pressure-reducing valve and plate
assembly (Figure 52, Item 7).
87. Install new O-ring (Figure 52, Item 8) on fitting (Figure 52, Item 9).
88. Install line (Figure 52, Item 4) on pressure-reducing valve and plate assembly (Figure 52, Item 7), and tighten
tube nut (Figure 52, Item 1).
Figure 52. Rear of Transmission.
0276