TM 5-3805-296-23-4
0276
INSTALLATION CONTINUED
46. Measure clearance between cap (Figure 42, Item 1) and machine with thickness gauge (Figure 42, Item 5).
47. Measure shim pack (Figure 42, Item 4) thickness as removed.
48. Shim pack (Figure 42, Item 4) should be 0.002 in. 0.001 (0.051 0.025 mm) less than thickness gauge
measurement.
49. Adjust shim pack (Figure 42, Item 4) thickness as required to achieve measurement desired.
50. Remove two bolts (Figure 42, Item 3), washers (Figure 42, Item 2), and cap (Figure 42, Item 1), from machine.
51. Install shim pack (Figure 42, Item 4), cap (Figure 42, Item 1), two washers (Figure 42, Item 2), and bolts
(Figure 42, Item 3) on machine.
Figure 42. Differential Support Pin Clearance.
0276
