TM 5-3805-296-23-4
0276
REMOVAL CONTINUED
56. Remove two bolts (Figure 18, Item 2), washers (Figure 18, Item 1), and cap (Figure 18, Item 3) from machine.
57. Remove shim pack (Figure 18, Item 4) from between cap (Figure 18, Item 3) and machine.
58. Install eye bolt (Figure 18, Item 5) on pin (Figure 18, Item 7).
59. Pull pin (Figure 18, Item 7) out about 6 inches and remove eye bolt (Figure 18, Item 5) from pin.
60. Remove pin (Figure 18, Item 7) from machine.
61. Remove O-ring (Figure 18, Item 6) from pin (Figure 18, Item 7). Discard O-ring.
Figure 18. Differential Support Pin.
0276