TM 5-3805-296-23-4
0251
REMOVAL CONTINUED
18. Remove basic engine wiring harness (Figure 10, Item 1) from machine.
Figure 10. Basic Engine Wiring Harness.
0251
END OF TASK
CLEANING AND INSPECTION
000251
1. Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
2. Clean and inspect all components IAW Electrical General Maintenance Instructions (WP 0540).
END OF TASK
INSTALLATION
000251
NOTE
Refer to removal for basic engine wiring harness routing.
1. With assistance, position basic engine wiring harness (Figure 10, Item 1) on machine.
2. Connect basic engine wiring harness connector (Figure 10, Item 3) and tighten bolt (Figure 10, Item 4) on
engine control module (Figure 10, Item 5).
NOTE
Refer to removal for tiedown strap quantity and location.
3. Install new tiedown straps (Figure 10, Item 2) on basic engine wiring harness (Figure 10, Item 1).