TM 5-3805-296-23-4
0245
CLEANING AND INSPECTION
000245
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000245
NOTE
Install wiring harness as noted during removal.
1. Install new O-ring (Figure 1, Item 4) on intake air pressure sensor (Figure 1, Item 3).
2. Install intake air pressure sensor (Figure 1, Item 3) on fitting (Figure 1, Item 5).
3. Connect intake air pressure sensor wiring harness connector (Figure 1, Item 2) to intake air pressure sensor
(Figure 1, Item 3), and slide lock tab (Figure 1, Item 1) into position.
END OF TASK
FOLLOW-ON TASKS
000245
1. Close right side engine doors (TM 5-3805-296-10).
2. Close front hood (TM 5-3805-296-10).
3. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
0245-3/(4 blank)
