TM 5-3805-296-23-4
0241
REMOVAL CONTINUED
10. Remove two gaskets (Figure 5, Items 2 and 5) from bonnet (Figure 5, Item 1). Discard gaskets.
11. Remove sleeve (Figure 5, Item 3) from bonnet (Figure 5, Item 1).
12. Remove two O-rings (Figure 5, Item 4) from sleeve (Figure 5, Item 3). Discard O-rings.
Figure 5. Gaskets and O-rings.
0241
END OF TASK
CLEANING AND INSPECTION
000241
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
INSTALLATION
000241
1. Install two new O-rings (Figure 5, Item 4) on sleeve (Figure 5, Item 3).
2. Install sleeve (Figure 5, Item 3) on bonnet (Figure 5, Item 1).
3. Install two new gaskets (Figure 5, Items 2 and 5) on bonnet (Figure 5, Item 1).