TM 5-3805-296-23-4
0241
INSTALLATION CONTINUED
8. Install two new O-rings (Figure 9, Item 8) on pipe (Figure 9, Item 7).
9. Install pipe (Figure 9, Item 7) on elbow (Figure 9, Item 6).
10. Install new gasket (Figure 9, Item 5), pipe (Figure 9, Item 7) and elbow (Figure 9, Item 6) on engine
(Figure 9, Item 11).
11. Install two P-clamps (Figure 9, Item 4), and one ladder clip (Figure 9, Item 1), three washers (Figure 9, Item 3),
and four bolts (Figure 9, Item 2) on elbow (Figure 9, Item 6).
12. Remove cribbing (Figure 9, Item 10) from under transmission oil cooler (Figure 9, Item 9).
Figure 9. Elbow.
0241
END OF TASK
FOLLOW-ON TASKS
000241
1. Install engine assembly (WP 0190).
2. Verify correct operation of machine (TM 5-3805-296-10).
END OF TASK
END OF WORK PACKAGE
