TM 5-3805-296-23-4
0241
REMOVAL
000241
1. Place cribbing (Figure 1, Item 10) under transmission oil cooler (Figure 1, Item 9).
2. Remove four bolts (Figure 1, Item 2), three washers (Figure 1, Item 3), two P-clamps (Figure 1, Item 4), and
one ladder clip (Figure 1, Item 1) from elbow (Figure 1, Item 6). Position P-clamp and ladder clip aside.
3. Remove elbow (Figure 1, Item 6), pipe (Figure 1, Item 7), and gasket (Figure 1, Item 5) from engine
(Figure 1, Item 11). Discard gasket.
4. Remove pipe (Figure 1, Item 7) from elbow (Figure 1, Item 6).
5. Remove two O-rings (Figure 1, Item 8) from pipe (Figure 1, Item 7).
Figure 1. Elbow.
0241
