TM 5-3805-296-23-4
0232
INSTALLATION CONTINUED
2. Remove screw cap (Figure 7, Item 5) from bottle (Figure 7, Item 4).
3. Install bottle (Figure 7, Item 4) on vacuum pump (Figure 7, Item 1).
4. Insert tubing (Figure 7, Item 3) through vacuum pump knob (Figure 7, Item 2) into bottle (Figure 7, Item 4).
5. Tighten vacuum pump knob (Figure 7, Item 2).
Figure 7. Vacuum Pump Assembly.
0232
NOTE
Remove as much fuel and oil as possible from cylinder.
6. Insert tubing (Figure 8, Item 3) into cylinder (Figure 8, Item 1).
7. Using vacuum pump (Figure 8, Item 2), remove fuel and oil from cylinder (Figure 8, Item 1).
Figure 8. Vacuum Pump.
0232