TM 5-3805-296-23-4
0228
FUEL RETURN LINE REMOVAL CONTINUED
NOTE
Note orientation of fittings to aid in installation.
13. Loosen jam nut (Figure 14, Item 3) and remove fitting (Figure 14, Item 2) from cylinder head
(Figure 14, Item 1).
14. Remove O-ring (Figure 14, Item 5) from fitting (Figure 14, Item 4). Discard O-ring.
Figure 14. Cylinder Head Fuel Return Hose Fitting.
0228
END OF TASK
CLEANING AND INSPECTION
000228
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0539).
END OF TASK
FUEL RETURN LINE INSTALLATION
000228
NOTE
Remove plugs and caps from fuel hoses and fittings.
Install fuel hoses as tagged and marked during removal.
Install fittings as noted during removal.
1. Install new O-ring (Figure 14, Item 5) on fitting (Figure 14, Item 4).
2. Install fitting (Figure 14, Item 2) on cylinder head (Figure 14, Item 1) and tighten jam nut (Figure 14, Item 3).