TM 5-3805-296-23-2
0143
Table 1. One or Both Headlights Fail To Operate in Low Beam Continued.
0143
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Using digital multimeter
One or Both Headlights Fail
Continuity Replace main cab wiring
(WP 0540), test for continuity
To Operate in Low Beam -
harness (WP 0505).
between connector W-C2
Continued
Proceed to Test Step 17.
terminal 30 (WP 0012, Figure 224)
No Continuity Replace headliner
and all other terminals
wiring harness (WP 0497).
in connector W-C2
Proceed to Test Step 17.
(WP 0012, Figure 224).
Test Step 17. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch to
ON position (TM 5-3805-296-10).
3. Turn mode switch on military light
switch to SER. DRIVE position
(TM 5-3805-296-10).
4. Observe both LO headlights
Both LO Headlights Operate
(TM 5-3805-296-10).
Troubleshooting complete.
One or Both LO Headlights Do Not
Operate Repeat troubleshooting from
the beginning.
END OF WORK PACKAGE
0143-9/(10 blank)