TM 5-3805-296-23-2
0142
Table 1. One or Both Headlights Fail To Operate in High Beam Continued.
0142
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
7. Using digital multimeter
One or Both Headlights Fail
Voltage 18 to 26 V Proceed to step 8.
(WP 0540), test for voltage
To Operate in High Beam
Voltage Less Than 18 V Proceed to
between connector L-C11
Continued
Test Step 7.
terminal 1 (WP 0012, Figure 209)
and ground.
8. Using digital multimeter
Voltage 18 to 26 V Replace right HI
(WP 0540), test for voltage
headlight (WP 0382).
between connector L-C11
Proceed to Test Step 18.
terminal 1 and terminal 2
Voltage Less Than 18 V Replace
(WP 0012, Figure 209).
hood wiring harness (WP 0389).
Proceed to Test Step 18.
Test Step 7. Test for Faulty Brights
Switch.
1. Turn mode switch on military light
switch to OFF position
(TM 5-3805-296-10).
2. Turn battery disconnect switch to
OFF position (TM 5-3805-296-10).
3. Remove six bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), and instrument
panel cover (Figure 1, Item 3) from
ROPS (Figure 1, Item 4).
Figure 1. Instrument Panel Cover and Retaining Hardware.
0142
