TM 5-3805-296-23-2
0138
Table 1. One or More Park Lights Do Not Operate Continued.
0138
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
One or More Park Lights Do
3. Using digital multimeter
Continuity Replace main cab wiring
Not Operate Continued
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C1
Proceed to Test Step 26.
terminal 50 (WP 0012, Figure 99)
No Continuity Proceed to step 4.
and ground.
4. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C2
Proceed to Test Step 26.
terminal 29 (WP 0012, Figure 224)
No Continuity Replace headliner
and all other terminals in
wiring harness (WP 0497).
connector W-C2 (WP 0012,
Proceed to Test Step 26.
Figure 224).
Test Step 26. Verify Malfunction is
Resolved.
1. Ensure all harness connectors are
connected.
2. If removed, install cover
(Figure 7, Item 4), two washers
(Figure 7, Item 2), and bolts
(Figure 7, Item 3) on rear blackout
lamp housing (Figure 7, Item 1).
Figure 7. Cover and Retaining Hardware on Rear Blackout Lamp Housing.
0138
