TM 5-3805-296-23-2
0137
Table 1. No Power From 12 Volt Power Converter or 12 Volt Auxiliary Port Continued.
0137
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 16. Verify Malfunction is
No Power From 12 Volt
Resolved.
Power Converter or 12 Volt
1. Ensure all harness connectors are
Auxiliary Port Continued
connected except connector
P-C10 (WP 0012, Figure 258).
2. If removed, install instrument panel
(Figure 5, Item 3) with six bolts
(Figure 5, Item 4) on ROPS
(Figure 5, Item 5).
3. If removed, install right vent
(Figure 5, Item 7) with two bolts
(Figure 5, Item 6) on instrument
panel (Figure 5, Item 3).
4. If removed, install left vent
(Figure 5, Item 2) with two bolts
(Figure 5, Item 1) on instrument
panel (Figure 5, Item 3).
Figure 5. Instrument Panel and Retaining Hardware.
0137
