TM 5-3805-296-23-2
0134
Table 1. Blower Motor Does Not Operate in One or More Speeds Continued.
0134
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
4. Perform steps 4a through 4f only if
Blower Motor Does Not
top plate and front plate were
Operate in One or More
removed from HVAC assembly.
Speeds Continued
WARNING
Use caution when using adhesives and sealants. Prolonged inhalation of
vapors can cause lung irritation. Contact with skin can cause dermatitis.
Wear gloves and safety goggles and use product in a well-ventilated area
away from open flame. If ingested, keep individual calm and seek
medical attention. DO NOT induce vomiting. If contact with skin or eyes is
made, flush thoroughly with water. Dispose of cleanup rags IAW local
policy and ordinances. Failure to follow this warning may result in injury to
personnel.
a. Apply adhesive to insulation
(Figure 23, Item 1), and install on
top plate (Figure 23, Item 2) to
cover seam between top plate
and front plate (Figure 23,
Item 4).
Figure 23. Insulation.
0134