TM 5-3805-296-23-2
0113
Table 1. Parking Brakes Do Not Engage Correctly Continued.
0113
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 10. Inspect Rear Brake
Parking Brakes Do Not
Actuators.
Engage Correctly
At both rear wheels, verify brake
Continued
Both Rear Actuators Not Extended
actuator (Figure 7, Item 1) is in
Proceed to Test Step 11.
extended position (Figure 7, Item 2).
Both Rear Actuators Extended
Same as brake applied position noted
Replace scraper park brake pressure
previously.
switch (WP 0366).
Proceed to Test Step 15.
Figure 7. Rear Brake Actuators.
0113
Test Step 11. Inspect Scraper
Parking Brake Air Hoses.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Using Compressed Air System
Air Hoses OK Replace rear quick
Inspection as a guide (WP 0176),
release valve (WP 0340).
verify if air hoses between rear
Proceed to Test Step 15.
brake actuators and quick release
Air Hose(s) Kinked or Damaged
valve are kinked or damaged.
Perform repair or replacement as
required by Compressed Air System
Inspection (WP 0176).
Proceed to Test Step 15.