TM 5-3805-296-23-2
0094
Table 1. 0177 Transmission Oil Temperature Sensor Diagnostic Code - Continued.
0094
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0177-08 Transmission Oil
Test Step 4. Inspect Engine Interface
Temperature Sensor
Wiring Harness, Main Cab Wiring
Abnormal Frequency, Pulse
Harness, Dash Wiring Harness, and
Width, or Period
Tractor Operator Monitor
Continued
Connectors.
1. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector W-C16
(WP 0012, Figure 87) from
connector CL-C3
(WP 0012, Figure 86).
3. Inspect connector W-C16
Connector W-C16 Damaged
(WP 0012, Figure 87) and
Replace main cab wiring harness
connector CL-C3
(WP 0505).
(WP 0012, Figure 86) for damage
Proceed to Test Step 16.
IAW Electrical General
Connector CL-C3 Damaged
Maintenance Procedures
Replace engine interface wiring
(WP 0540).
harness (WP 0211).
Proceed to Test Step 16.
No Problem Found Proceed to
step 4.
4. Remove upper and lower plenum
from ROPS (WP 0504).
5. Disconnect connector P-C1
(WP 0012, Figure 253) from
connector W-C7
(WP 0012, Figure 252).
6. Inspect connector W-C7
Connector W-C7 Damaged Replace
(WP 0012, Figure 252) and
main cab wiring harness
connector P-C1
(WP 0505).
(WP 0012, Figure 253) for damage
Proceed to Test Step 16.
IAW Electrical General
Connector P-C1 Damaged Replace
Maintenance Procedures
dash wiring harness (WP 0510).
(WP 0540).
Proceed to Test Step 16.
No Problem Found Proceed to
step 7.
7. Remove six bolts
(Figure 1, Item 1), washers
(Figure 1, Item 2), and instrument
panel cover (Figure 1, Item 3) from
ROPS (Figure 1, Item 4).
0094-4
