TM 5-3805-296-23-2
0071
Table 1. 1276 Bowl Down Proportional Solenoid Diagnostic Codes Continued.
071
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Draft
1276-03 Bowl Down
Frame and Bowl Side Wiring
Harness.
Normal Continued
1. Disconnect connector AE-C1
(WP 0012, Figure 144)
from connector E-C2
(WP 0012, Figure 143).
Continuity Replace draft frame and
bowl side wiring harness (WP 0348).
between connector AE-C1
Proceed to Test Step 5.
terminal 7 (WP 0012, Figure 144)
No Continuity Proceed to Test
and all other terminals
Step 3.
in connector AE-C1
(WP 0012, Figure 144).
Test Step 3. Test for Shorted Hitch
Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), bushings
(Figure 4, Item 3), and splash
shield (Figure 4, Item 4) from
machine.
Figure 4. Splash Shield and Retaining Hardware.
0071