TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 8. Test for Shorted
0700-02 Transmission Gear
Transmission Wiring Harness.
Sensor Erratic, Intermittent,
1. Turn ignition switch and battery
or Incorrect Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Disconnect connector A-C1
(WP 0012, Figure 106)
from connector J-C3
(WP 0012, Figure 101).
3. Using digital multimeter
Continuity at Any Test Point
(WP 0540), test for continuity
Replace transmission wiring harness
between the following:
(WP 0266).
a. Connector A-C1 terminal 30
Proceed to Test Step 20.
(WP 0012, Figure 106) and all
No Continuity at Any Test Point
other terminals in connector
Proceed to step 4.
A-C1 (WP 0012, Figure 106).
b. Connector A-C1 terminal 29
(WP 0012, Figure 106) and all
other terminals in connector
A-C1 (WP 0012, Figure 106).
c.
Connector A-C1 terminal 28
(WP 0012, Figure 106) and all
other terminals in connector
A-C1 (WP 0012, Figure 106).
d. Connector A-C1 terminal 27
(WP 0012, Figure 106) and all
other terminals in connector
A-C1 (WP 0012, Figure 106).
e. Connector A-C1 terminal 26
(WP 0012, Figure 106) and all
other terminals in connector
A-C1 (WP 0012, Figure 106).
0064-14
