TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Using digital multimeter
0700-02 Transmission Gear
Continuity at Any Test Point
(WP 0540), test for continuity
Sensor Erratic, Intermittent,
Replace chassis wiring harness
between the following:
or Incorrect Continued
(WP 0305).
a. Connector J-C3 terminal 30
Proceed to Test Step 20.
(WP 0012, Figure 101) and
No Continuity at Any Test Point
ground.
Proceed to Test Step 10.
b. Connector J-C3 terminal 29
(WP 0012, Figure 101) and
ground.
c.
Connector J-C3 terminal 28
(WP 0012, Figure 101) and
ground.
d. Connector J-C3 terminal 27
(WP 0012, Figure 101) and
ground.
e. Connector J-C3 terminal 26
(WP 0012, Figure 101) and
ground.
Test Step 10. Test for Shorted Main
Cab Wiring Harness.
1. Disconnect connector W-C12
(WP 0012, Figure 88) from
transmission/chassis ECM.
2. Disconnect connector W-C13
(WP 0012, Figure 89) from
transmission/chassis ECM.
0064-16