TM 5-3805-296-23-1
0064
Table 1. 0700 Transmission Gear Position Sensor Diagnostic Codes Continued.
064
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
2. On MSD, select applicable status
0700-02 Transmission Gear
All Values Change as Specified
group (Figure 2, Item 1).
Sensor Erratic, Intermittent,
Replace tractor actual gear switch
View displayed Value
or Incorrect Continued
(WP 0273).
(Figure 2, Item 3) for each Gear
Proceed to Test Step 20.
Code (Figure 2, Item 2) while
One or More Values Fail to Change
performing the following:
as Specified Replace transmission/
a. Connect jumper wire between
chassis ECM (WP 0495).
terminal 3 and 10 of connector
Proceed to Test Step 20.
AG-C1 (WP 0012,
Figure 120). Remove jumper
wire. Gear Code #1 Value
changes from Open to
Grounded to Open.
b. Connect jumper wire between
terminal 9 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #2 Value changes from
Open to Grounded to Open.
c.
Connect jumper wire between
terminal 4 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #3 Value changes from
Open to Grounded to Open.
d. Connect jumper wire between
terminal 7 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #4 Value changes from
Open to Grounded to Open.
e. Connect jumper wire between
terminal 1 and 10 of
connector AG-C1
(WP 0012, Figure 120).
Remove jumper wire. Gear
Code #5 Value changes from
Open to Grounded to Open.
0064-10
