TM 5-3805-296-23-1
0061
Table 1. 0590 Communication Diagnostic Codes Continued.
061
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 17. Test for Shorted Fuse
0590-12 Wrong Response
Panel Wiring Harness.
From Engine Control
1. Disconnect connector CG-C1
Module Continued
(WP 0012, Figure 283) from
connector W-C8 (WP 0012,
Figure 282).
2. Using digital multimeter
Continuity Replace fuse panel wiring
(WP 0540), test for continuity
harness (WP 0515). Install circuit
between connector CG-C1
breaker F14 on circuit breaker panel
terminal 27 (WP 0012, Figure 283)
(TM 5-3805-296-10).
and all other terminals in
Proceed to Test Step 20.
connector CG-C1
No Continuity Proceed to step 4.
(WP 0012, Figure 283) except
terminal 28 and terminal 29.
3. Using digital multimeter
Continuity Replace fuse panel wiring
(WP 0540), test for continuity
harness (WP 0515). Install circuit
between connector CG-C1
breaker F14 on circuit breaker panel
terminal 27 (WP 0012, Figure 283)
(TM 5-3805-296-10).
and ground.
Proceed to Test Step 20.
No Continuity Proceed to Test
Step 18.
Test Step 18. Test for Shorted Main
Cab Wiring Harness.
1. Disconnect connector W-C16
(WP 0012, Figure 87)
from connector CL-C3
(WP 0012, Figure 86).
2. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505). Install circuit
between the following:
breaker F14 on circuit breaker panel
a. Connector W-C16 terminal 11
(TM 5-3805-296-10).
(WP 0012, Figure 87) and all
Proceed to Test Step 20.
other terminals in connector
No Continuity Proceed to step 3.
W-C16 (WP 0012, Figure 87).
b. Connector W-C16 terminal 18
(WP 0012, Figure 87) and all
other terminals in connector
W-C16 (WP 0012, Figure 87).
c.
Connector W-C16 terminal 20
(WP 0012, Figure 87) and all
other terminals in connector
W-C16 (WP 0012, Figure 87).
0061-50