TM 5-3805-296-23-1
0061
Table 1. 0590 Communication Diagnostic Codes Continued.
061
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 16. Verify if Code is Still
0590-12 Wrong Response
Active.
From Engine Control
1. Ensure all harness connectors are
Module Continued
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
590-12 Wrong Response From
3. At MSD, check for active
Engine Control Module Becomes
diagnostic code 590-12 Wrong
Inactive Troubleshooting complete.
Response From Engine Control
Proceed to step 4.
Module (WP 0008).
590-12 Wrong Response From
Engine Control Module Remains
Active Replace engine ECM
(WP 0252).
Proceed to Test Step 20.
4. Install instrument panel
(Figure 28, Item 3) with six bolts
(Figure 28, Item 4) on ROPS
(Figure 28, Item 5).
5. Install right vent (Figure 28, Item 7)
with two bolts (Figure 28, Item 6)
on instrument panel
(Figure 28, Item 3).
6. Install left vent (Figure 28, Item 2)
with two bolts (Figure 28, Item 1)
on instrument panel
(Figure 28, Item 3).
Figure 28. Instrument Panel and Retaining Hardware.
0061
