TM 5-3805-296-23-1
0061
Table 1. 0590 Communication Diagnostic Codes Continued.
061
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 10. Test Main Cab Wiring
0590-02 Engine Control
Harness for High Resistance or
Module Incorrect Signal
Open.
Continued
1. Remove jumper wire from
terminal 1 and terminal 2 of
connector CL-C3
(WP 0012, Figure 86).
2. Disconnect connector W-C12
(WP 0012, Figure 88) from
transmission/chassis ECM.
3. Connect jumper wire between
terminal 7 and terminal 8
of connector W-C12
(WP 0012, Figure 88).
4. Disconnect MSD from connector
CG-C3 (WP 0012, Figure 96).
5. Remove six bolts
(Figure 4, Item 1), washers
(Figure 4, Item 2), and instrument
panel cover (Figure 4, Item 3)
from ROPS (Figure 4, Item 4).
Figure 4. Instrument Panel Cover and Retaining Hardware.
0061
