TM 5-3805-296-23-1
0035
Table 1. 0548 Throttle Lock Diagnostic Codes Continued.
035
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
3. Using digital multimeter
0548-06 Throttle Lock Lamp
Continuity Replace main cab wiring
(WP 0540), test for continuity
Current Above Normal
harness (WP 0505).
between connector W-C7
Continued
Proceed to Test Step 5.
terminal 15 (WP 0012, Figure 252)
No Continuity Proceed to step 4.
and ground.
4. Using digital multimeter
Continuity Replace main cab wiring
(WP 0540), test for continuity
harness (WP 0505).
between connector W-C16
Proceed to Test Step 5.
terminal 16 (WP 0012, Figure 87)
No Continuity Proceed to Test
and all other terminals
Step 4.
in connector W-C16
(WP 0012, Figure 87).
Test Step 4. Test for Shorted Engine
Interface Wiring Harness.
1. Lower left frame access plate
(WP 0376).
2. Remove four bolts
(Figure 5, Item 1), washers
(Figure 5, Item 2), bushings
(Figure 5, Item 3), and splash
shield (Figure 5, Item 4) from
machine.
Figure 5. Splash Shield and Retaining Hardware.
0035