TM 5-3805-296-23-1
0035
Table 1. 0548 Throttle Lock Diagnostic Codes Continued.
035
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
0548-06 Throttle Lock Lamp
Test Step 5. Verify Malfunction is
Current Above Normal
Resolved.
Continued
1. Ensure all harness connectors are
connected.
2. Turn battery disconnect switch and
ignition switch to ON position
(TM 5-3805-296-10).
3. At MSD, check for active
548-6 Throttle Lock Lamp Current
diagnostic codes (WP 0008).
Above Normal Becomes Inactive
Proceed to step 4.
548-6 Throttle Lock Lamp Current
Above Normal Remains Active
Repeat troubleshooting from the
beginning.
4. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-3805-296-10).
5. If removed, install splash shield
(Figure 5, Item 4), four bushings
(Figure 5, Item 3), washers
(Figure 5, Item 2), and bolts
(Figure 5, Item 1) on machine.
6. If lowered, install left frame access
plate (WP 0376).
7. If removed, install lower and upper
plenum on ROPS (WP 0504).
8. Troubleshooting complete.
END OF WORK PACKAGE
0035-13/(14 blank)