TM 5-3805-296-23-1
0018
Table 1. 0006 Fuel Injector Diagnostic Codes Continued.
018
CID FMI
TEST OR INSPECTION
CORRECTIVE ACTION
Test Step 2. Test for Shorted Injector
0006-06 Cylinder #6 Injector
Wiring Harness.
Current Above Normal
1. Turn ignition switch and battery
Continued
disconnect switch to OFF position
(TM 5-3805-296-10).
2. Remove valve cover (WP 0182).
3. Disconnect connector CN-C6
(WP 0012, Figure 10) from fuel
injector #5 (WP 0012, Figure 9).
4. Disconnect connector CN-C7
(WP 0012, Figure 12) from fuel
injector #6 (WP 0012, Figure 11).
5. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 6 (WP 0012, Figure 13)
No Continuity Proceed to step 5.
and all other terminals
in connector CN-C1
(WP 0012, Figure 13).
6. Using digital multimeter
Continuity Replace engine injector
(WP 0540), test for continuity
wiring harness (WP 0183).
between connector CN-C1
Proceed to Test Step 4.
terminal 6 (WP 0012, Figure 13)
No Continuity Replace fuel injector
and ground.
#6 (WP 0232).
Proceed to Test Step 4.
0018-14