TM 9-4940-568-34
6-38
6-8.
OIL FILLED DISC BRAKE ASSEMBLY REPAIR (Continued)
(3) Install preformed packing (20) on piston
(21).
(4) Install six springs (22) in cover (4).
(5) Install piston (21) on cover (4).
(6) Install retaining ring (18) on shaft (15).
(7) Install key (19) on shaft (15).
CAUTION
Install gear (17) with holes in
direction
noted
during
disassembly. Failure to comply
may
result
in
damage
to
equipment.
(8) Install gear (17) on shaft (15).
(9) Install retaining ring (16) on shaft (15).
(10) Install preformed packing (14) on ring
gear (3).
(11) Install ring gear (3) on cover (4) with
matchmarks aligned.
(12) Apply sealing compound to threads of
six screws (12).
(13) Position six screws (12) and washers
(13) on cover (4).
(14) Tighten six screws (12) to 28 lb-ft
(38 N.m).
(15) Position shaft (15) in ring gear (3) with
gear (17) resting slightly above ring
gear (3).