TM 9-4940-568-34
6-39
(16) Alternately install eight stators (10) and
seven discs (11) in ring gear (3).
(17) Install two oil seals (8) in end cap (5).
(18) Install preformed packing (9) in end cap
(5).
(19) Fill ring gear (3) with oil.
(20) Install end cap (5) on ring gear (3) with
matchmarks aligned.
(21) Apply sealing compound to threads of
six screws (6).
(22) Position six washers (7) and screws (6)
in end cap (5).
(23) Tighten six screws (6) to 28 lb-ft
(38 N.m).
(24) Install shaft (15) in ring gear (3).
(25) Apply sealing compound to threads of
plug (1) and bleeder valve (2).
(26) Install plug (1) and bleeder valve (2) in
ring gear (3).
END OF TASK
Follow-On Maintenance
Install oil filled disc brake
assembly (para 3-25).