TM 9-4940-568-34
6-35
6-8.
OIL FILLED DISC BRAKE ASSEMBLY REPAIR
THIS TASK COVERS:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
INITIAL SETUP
Tools
Tool Kit, General Mechanics
(Item 67, Appendix F)
Materials/Parts
Hydraulic oil (Item 16, Appendix B)
Sealing compound (Item 29, Appendix B)
Packing, preformed (4) (Item 85, Appendix E)
Seal (2) (Item 151, Appendix E)
Equipment Condition
Oil filled disc brake assembly removed.
(para 3-25).
Special Environmental Conditions
Cleanliness is extremely important when working
on hydraulic equipment. Clean all parts before
disassembly and work in a clean area.
a.
Disassembly
(1) Remove plug (1) and bleeder valve (2)
from ring gear (3).
(2) Matchmark ring gear (3) to cover (4) and
end cap (5).
(3) Remove six screws (6), washers (7),
and end cap (5) from ring gear (3).
(4) Remove and discard two oil seals (8)
and preformed packing (9) from end cap
(5).
(5) Remove eight stators (10) and seven
discs (11) from ring gear (3).