TM 9-4940-568-34
6-36
6-8.
OIL FILLED DISC BRAKE ASSEMBLY REPAIR (Continued)
WARNING
Cover is under pressure. Loosen
screws equally when removing
cover. Failure to comply may
result in injury to personnel.
(6) Remove six screws (12) and washers
(13) from cover (4).
(7) Remove ring gear (3) from cover (4).
(8) Remove and discard preformed packing
(14) from ring gear (3).
(9) Remove shaft (15) from cover (4).
(10) Remove retaining ring (16) from shaft
(15).
NOTE
Note direction of holes in gear
face prior to removing.
(11) Remove gear (17) from shaft (15).
(12) Remove retaining ring (18) from shaft
(15).
(13) Remove key (19) from shaft (15).
(14) Remove and discard preformed packing
(20) from piston (21).
(15) Remove piston (21) from cover (4).
(16) Remove six springs (22) from cover (4).